How to Change a Tire: A Simple Guide for Beginners
Getting a flat tire can be stressful, but don’t worry! You don’t need to be a car expert to change it. Follow these super simple steps, and you’ll be back on the road in no time.
Step 1: Pull Over Safely
Find a safe spot away from traffic, like the shoulder of the road or a parking lot. Turn on your hazard lights so other drivers see you.
Step 2: Turn Off the Car and Use the Parking Brake
Put your car in park, turn it off, and pull the parking brake to keep it steady while you work.
Step 3: Get Your Tools
Grab the spare tire, a jack (to lift the car), and a wrench (to loosen the nuts). These are usually in your trunk or under the car's floor mat.
Step 4: Loosen the Lug Nuts
Use the wrench to turn the nuts on the flat tire counterclockwise. Just loosen them a little for now—they’ll be easier to remove once the car is lifted.
Step 5: Lift the Car
Place the jack under the car’s metal edge near the flat tire (your car manual shows you where). Pump the jack handle to lift the car until the flat tire is off the ground.
Step 6: Remove the Flat Tire
Unscrew the nuts completely and keep them safe—they’re small and easy to lose! Then, pull the flat tire straight off the car.
Step 7: Put on the Spare Tire
Slide the spare tire onto the wheel bolts. Screw the nuts back on by hand until they’re snug.
Step 8: Lower the Car and Tighten the Nuts
Lower the car back down with the jack. Use the wrench to tighten the nuts as much as you can by turning them clockwise.
That’s it! You’re ready to drive again, but don’t forget to get your flat tire repaired or replaced soon—spare tires are temporary.
Need More Tips? Click Here!