Yes, you can replace brake pads without replacing the rotors, as long as the rotors are above minimum thickness, not warped and not deeply grooved. If you feel a pulsing brake pedal, hear grinding, or the pads wore down to metal, the rotors need to be replaced too. New pads on worn rotors stop worse and wear out faster.
Pads Only Is Fine When
- The rotors are above the minimum thickness stamped on them.
- The braking surface is smooth, with no deep grooves or a raised lip on the edge.
- The brake pedal feels smooth, with no pulsing or steering wheel shake.
You Need Rotors Too When
- The brake pedal pulses or the steering wheel shakes when you stop.
- You hear grinding. That usually means the pads wore to metal and cut into the rotor.
- The rotors have deep grooves, cracks or heavy rust pitting.
- The rotors are at or below minimum thickness.
Putting new pads on rotors like that means the car stops worse, the brakes can squeal or shake, and the new pads wear out faster.
Pads or Pads and Rotors? We Will Tell You.
We check your rotors in your driveway in Sioux Falls, Brandon, Tea and Harrisburg and quote one all-in price before we start.
Get Free EstimateThe Warranty Difference
| Job | Direct Brakes warranty |
|---|---|
| Pads and rotors | 12 months or 12,000 miles |
| Pads only | 3 months or 3,000 miles |
Pads only costs less today, but old rotors can wear out new pads early, which is why the warranty is shorter. If the rotors are borderline, pads and rotors together is usually the better buy. Get your exact brake price in about a minute.


