On most cars with an electronic parking brake, a small motor on each rear caliper holds the parking brake. Before the rear pads can be replaced, that motor has to be backed off, which is called service mode or maintenance mode. It is usually done with a scan tool. Forcing the caliper piston back without it can strip the motor, damage the caliper and leave you with a parking brake warning light.
How to Tell If Your Car Has One
If you set the parking brake with a small switch or button marked P instead of a hand lever or a foot pedal, you have an electronic parking brake. Most newer cars and SUVs do.
What Service Mode Does
- The parking brake motors on the rear calipers back off all the way.
- The old pads come out and the caliper piston is pushed back.
- New pads and rotors go in.
- The car is taken out of service mode and the parking brake is applied to set the new pads.
Rear Brakes on a Newer Car?
We bring the scan tool and do rear brakes with electronic parking brakes in your driveway in Sioux Falls, Brandon, Tea and Harrisburg.
Get Free EstimateWhat Goes Wrong Without It
- The parking brake motor strips or burns out.
- The caliper gets damaged.
- A parking brake warning light comes on.
- The parking brake does not hold.
Replacing a damaged motor or caliper adds real money to what should have been a routine brake job. If a shop or a friend is doing your rear brakes, ask if they have a scan tool that works on your car. Get your exact brake price in about a minute.


